Products description
If it is not possible to radiate the signal freely at the installation location of the FLARM® , the antenna can be mounted with the antenna cable, e.g. on the instrument panel, behind the landing gear or in the tail unit.
When using monopole antennas (e.g. the original toothpick antenna or the BD9i), a counter pole (aluminium, brass, nickel silver) of at least 15x15cm is required; this can easily be made yourself, e.g. from aluminium foil, and is not included in the scope of delivery.
The cable is suitable for all antennas without a connecting cable, such as the original ‘toothpick’ antenna or the dipole axial antenna, as well as an extension cable.
Cable lengths up to 2m:
Cable type: RG-174, diameter approx. 3mm, very flexible, attenuation approx. 1.0 dB/m. With antenna socket at the antenna end of the cable for fastening and / or proper contacting of a ground plane if necessary.
Cable lengths over 2m:
Cable type: RG-240, diameter approx. 6.5mm, moderately flexible, bending radius approx. 2.5cm, double shielded, attenuation approx. 0.25 dB/m. There is NO antenna socket at the antenna end of the cable. This cable is suitable as a tail unit antenna in conjunction with the dipole axial antenna, among other things.
PowerFLARM Fusion devices:
This extension cable cannot be used on the PowerFLARM Fusion without the appropriate adapter, the adapter is available here.
The following applies to all antenna cables: For a sealed IGC or IGC/ENL-equipped Classic FLARM, an antenna adapter is recommended on the FLARM side.
When using monopole antennas (e.g. the original toothpick antenna or the BD9i), a counter pole (aluminium, brass, nickel silver) of at least 15x15cm is required; this can easily be made yourself, e.g. from aluminium foil, and is not included in the scope of delivery.
The cable is suitable for all antennas without a connecting cable, such as the original ‘toothpick’ antenna or the dipole axial antenna, as well as an extension cable.
Cable lengths up to 2m:
Cable type: RG-174, diameter approx. 3mm, very flexible, attenuation approx. 1.0 dB/m. With antenna socket at the antenna end of the cable for fastening and / or proper contacting of a ground plane if necessary.
Cable lengths over 2m:
Cable type: RG-240, diameter approx. 6.5mm, moderately flexible, bending radius approx. 2.5cm, double shielded, attenuation approx. 0.25 dB/m. There is NO antenna socket at the antenna end of the cable. This cable is suitable as a tail unit antenna in conjunction with the dipole axial antenna, among other things.
PowerFLARM Fusion devices:
This extension cable cannot be used on the PowerFLARM Fusion without the appropriate adapter, the adapter is available here.
The following applies to all antenna cables: For a sealed IGC or IGC/ENL-equipped Classic FLARM, an antenna adapter is recommended on the FLARM side.
Accessories
A product slider follows - navigate to the individual items using the Tab key.
PowerFLARM Fusion Connector-Set from Core
This product is compatible with:
A product slider follows - navigate to the individual items using the Tab key.
Dipol-RF-Antenna "Axial"
AIR Traffic - Collision Avoidance System
Customers who bought this product also bought the following products:
A product slider follows - navigate to the individual items using the Tab key.
"Ka6" Remove before flight - Golden Series
Sale
Wettbewerbssegelflug - Mental zum Sieg
RF antenna
ADS-B Dipol antenna for PowerFLARM Core
Dipol-RF-Antenna "Axial"
SuperFAnt
Last viewed:
A product slider follows - navigate to the individual items using the Tab key.
Antenna cable