The Automatic water ballast meter is designed to make water filling simple. No more guesswork about how much water is in your wings! No more wasted water spilling out because you forgot to turn the hose or pump off when the wings were full! Using the Watermeter is really simple. Just connect to mains or water pump, set the number of litres you want to fill and press start. You will get an accurately metered dose of water, and then the water meter closes the valve and stops the pump automatically when you reach the water level you need, leaving you to spend time on other glider preparation. You can also use this watermeter for i.e. brewery or bakery applications.
Here is a short list of features and benefits which your new water ballast meter brings to you:
- Exact and quick setting of required amount of water ballast
- Easy recall of last few inserted values
- You can connect the device to water main supply or to a small external water pump
- The connected external water pump is being switched ON and OFF automatically when required amount is reached
- Easy calibration for accurate measuring even when using another measuring units than litres
- Water ballast meter can be customized to fit your preferred method of filling, using accessory kits available from IMI
Technical parameters
|
Dimensions
|
200 x 132 x 66 mm
|
Weight
|
0,95 kg
|
Input voltage
|
8 - 16V DC
|
Quiescent power consumption
|
1 W
|
Maximum power consumption
|
7 W
|
Water pump switch
|
max 24V / 10A DC – protected by fuse
|
Minimum water pressure
|
50 kPa (0.5 bar, 7.25 psi)
|
Maximum water pressure
|
600 kPa (6 bar, 87 psi)
|
Minimum flow
|
3 liters/min
|
Maximum flow
|
25 liters/min
|
Measurement accuracy
|
+/- 3%
|
|
Customers who bought this product also bought the following products:
from 1,80 EUR
unit price 2,20 EUR
0,11 EUR per m